Second, adding the integral segment to the circuit make the interface box be able to output both the speed and the displacement signal, and not have to switch the two signal in the sensor. 其次,在前置电路增加积分环节,这样在接口箱可以输出并切换速度和位移两种信号,而不必在传感器端进行切换,给实地测试带来方便;
Based on the traditional slippage correlation acquisition, adding an external circuit for reference makes the positive-negative maximum of the merit of correlation. 在传统滑动相关捕获算法基础上,增加一条参考支路,使相关曲线出现正负双峰值。
Consideration of Adding PE Line of Lighting Ruturn Circuit in Residence 关于住宅中照明回路增加PE线的思考
The circuit ′ s working stability is improved greatly through anti-breakdown protection and adding appropriate time-delay circuit. 通过对高压器件的防击穿保护,并增加适当的延时电路,大幅度提高了驱动电路的工作稳定性。
First, adding the filtering segment to the circuit could be helpful to remove the power disturb and other high frequency disturb, so it become much easier to process the signal. 首先,在前置电路设计上加上滤波环节滤除工频干扰以及其它高频干扰,给信号处理带来方便;
The measuring function of short persistence oscillograph can be extended by adding pulse wave collecting circuit and signal processing circuit. 通过增加脉搏波采集电路和信号处理电路,扩展短余辉电子示波器的测量功能。
By adding this compensatory circuit, the output character of the inverter is improved. 通过加入这种前馈电路,可以提高逆变器的输出电压外特性。
Adding the watchdog circuit, the system can avoid program operation confusion and assure the system operation normal. 看门狗电路的加入,使系统避免程序运行混乱,保证系统正常工作。
With increasing frequency and adding bandwidth, design of RF circuit is harder and harder. 随着频率的提高和带宽的增加,射频前端的设计越来越困难。
Because the soft switches are realized without adding any auxiliary device, the whole circuit is simple axed can be realized easily comparing with ZCS PWM Boost full-bridge converter. 由于软开关的实现不需要任何其它的辅助元件,所以与通常的零电流开关PWMboost仝桥变换器相比,该变换器结构简单,容易实现。
The detector detects the four-line optical signal in space, then restricts the signal peak value under3V by high speed operation and connects with DSP2812 A/ D after adding protection circuit. 探测器探测到空间的四路光信号,经高速运放将信号峰值限制在3V内,加保护电路后接入DSP2812的A/D。
In addition, the count demodulator's performance can be further improved by adding a slicing amplifier in the wave-shaping circuit. 并且通过在整形电路中增加限幅放大器,可以进一步提高计数检波器的性能。
The hardware processing method includes adding Smiter trigger in RC filter circuit to plastic the output wave of filter circuit, acquiring front steep output signal of and making reverse operation in CPLD. 硬件处理方法是在RC滤波电路的输出端加施密特触发器,对滤波电路的输出整形,取得前沿很陡的输出信号,并在CPLD中对信号作反相处理。
This article introduce modification desig-nation on adding ARM signal circuit and the site test. 本文对MACHA爆炸机增加预备信号电路的改造设计、制做及现场试验作了介绍。
By adding a snub circuit, it can realize the soft switching for both main switch and assistant switch, reduce the voltage and the current stress in the switch device and improve the total efficiency. 缓冲电路的加入,使主、辅助开关都能实现软化,减小了开关管的电压和电流应力,提高了整机效率。
Adding evolvable computation into circuit automatic design, and through the basic circuit components on the programmable logical device ( PLD) evolved to design a human-difficult circuit structure automatically, which is called evolutionary design of hardware. 在电路设计中引入演化计算,在可编程逻辑器件上通过对基本电路元器件进行演化而自动生成人工不可能设计出的电路结构,称为演化硬件设计。
An effective way to reduce the leakage power is by means of multithreshold CMOS technique, which can restrain the leakage current by adding a MOS transistor to low threshold circuit. 多阈值CMOS技术是一种降低电路漏电流功耗的有效方法.它通过接入高阈值MOS管来抑制低阈值模块的漏电流。
To prevent non-standard operation oil current breaker in the communication circuit of transmission station, using technology improved by adding voltage relay contact point in the circuit, the reliability of the safety running is improved. 为预防变电站联络线路上油断路器的非规范操作、采取在合闸回路中增设电压继电器触点的技术改进措施,提高了变电站联络线路安全运行的可靠性。
Adding energy metering device in metering secondary circuit can solve the above-mentioned problems. 在计量二次回路中加装计量电压自动切换装置可解决上述问题。
The main characteristics of this device was the adding of auxiliary circuit which was parallel connected with the main circuit. Constant current was obtained during the discharge of the storage battery through the regulation of auxiliary circuit by the automatic constant current control device. 该装置的特点是在主回路电路中增加并联辅助回路,通过用自动控制装置来调整辅助回路电流,使蓄电池放电电流保持恒定。
The system error of the resistance measurement by the voltammetry, which is caused by the internal resistance of the voltmeter and galvanometer, can be reduced through a two-time measuring after adding a series resistance to the circuit. 通过在电路中串入一附加电阻,经过两次测量,可以减小伏安法测量电阻时有电压表、电流表内阻带来的系统误差。
The working principle and the basic structure of the coagulant-adding system are introduced and the hardware circuit and the software flow are explained in detail. 并介绍了污水处理过程中加药系统的工作原理和基本结构,对控制系统的硬件电路和软件流程进行了详细说明。
It utilizes emulation software Matlab to carry on emulation experiment and harmony wave analysis. Through the experiment, after adding soft switch transformed circuit, total distortion of input current is reduced, the circuit is operated under unit power factor, and suppresses the harmony wave effectively. 利用仿真软件Matlab进行仿真实验,并作谐波分析,通过实验得到加入软开关变换电路后,降低输入电流的总失真,电路工作在单位功率因数状态下,有效抑制谐波的产生。
By adding hardware or changing the circuit structure, to make the designed circuit easy, that means designed for testability. 通过添加硬件或者改变电路结构,使所设计的电路易于测试,即进行可测性设计。
Adding an equalization circuit is a good solution, especially for the expensive big capacity lithium-ion batteries, which need effective and reliable equalization circuits and control strategies. 尤其是对于大容量的锂电池组,价格昂贵,更是需要有效可靠的均衡电路与均衡策略。
By the results of simulation, this paper summarized the measures for improving the reliability of distribution network, which include installation fuse in load branch line, adding circuit breaker, disconnector and backup appropriately. 根据仿真计算的结果,总结了提高配电网可靠性的措施。在负荷分支线安装熔断器,增设断路器、隔离开关以及适当添加备用电源均可提高配电网的可靠性。
Consider racing circuit happened single-phase short circuit fault, will be in grounded potential power flow produce unfavorable point, so should be in reclosing controlled reactor limit on adding small neutral circuit reactance. 考虑空载线路发生单相短路接地时,将在故障点产生潜供电流不利于重合闸,故应该在可控电抗器中性点加装小电抗进行限制。
Based on the current array CCD image sensor technology, the integration time for each pixel sensitive unit in the CCD image sensor can be controlled independently by way of adding circuit for pixel sensitive unit addressing and integration pulse generating. 在现有面阵CCD图像传感器结构基础上,通过增加像敏单元寻址电路、光积分时间脉冲产生电路和光积分时间设定电路,使面阵CCD图像传感器每个像敏单元的光积分时间可以单独设定。
Adding resistance in the start circuit can contribute the overall circuit to start their own more easier. 启动电路中加入的电阻有助于整体电路更容易自行启动。